300 SRT-8 V8-6.1L (2008)
21. Carefully mark location of rear crossmember on body at all four mount (bushing) locations using a marker or crayon. Do not use a scratch awl to
mark location.
22. Position an extra pair of jack stands under and support forward end of engine cradle to help stabilize vehicle during rear suspension
removal/installation.
23. Position under-hoist utility jack or transmission jack (2) under center of rear crossmember (1). Raise jack head to contact crossmember and secure
in place.
WARNING: Before opening fuel system, review all Warnings and Cautions.
24. Remove fuel filler tube. See: Powertrain Management/Fuel Delivery and Air Induction/Fuel Tank/Fuel Filler Neck/Service and Repair/Removal
