300 SRT-8 V8-6.1L (2008)
11. Torque propeller shaft coupler-to-axle flange bolt/nuts to 58 Nm (43 ft. lbs.).
12. Using a 14mm hex, remove rear axle fill plug (1). Fill axle with Mopar(R) 75W-140 Synthetic Gear & Axle Lubricant in the following quantities:
-
198 Axle: 1.4L (1.5 qts.)
-
210 Axle: 1.6L (1.7 qts.)
13. Install and torque fill plug (1) to:
-
198 Axle: 60 Nm (44 ft. lbs.)
-
210 Axle: 50 Nm (37 ft. lbs.)