chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Steering Column Control Module|Description and Operation|Page 4306 > < Steering Column Control Module|Description and Operation|Page 4304
Page 8
background image

7. If equipped wit ESP Install the steering angle sensor and screw (3) located at the six o'clock position.

8. Install the clockspring and screws (1).
9. If equipped with ESP Recalibrate the steering angle sensor using the scan tool.

INSTALLATION 

1. Install the SCCM (1) onto the steering column.

Steering Column Control Module|Description and Operation|Page 4306 > < Steering Column Control Module|Description and Operation|Page 4304