300M V6-3.5L VIN G (2000)
Rear Door Panel: Service and Repair
Rear Door Trim Panel
REAR DOOR TRIM PANEL REMOVAL
CAUTION: Do not pry on door trim panel, damage to trim panel will result.
1. Remove trim plug from the pull cup and remote bezel by inserting a small flat blade tool into the notch and remove, if equipped (LHS/300M).
2. Remove screw in the pull cup.
3. Remove screw in remote bezel.
4. Remove three screws from the bottom edge of door.
5. Using an trim tool, disengage the retaining clips from the door trim panel to the door panel. Two clips at the rear of panel and one at the front of
the panel.