300M V6-3.5L VIN G (2000)
6. Slide seat belt through the B-pillar trim.
7. Remove B-pillar trim from vehicle.
INSTALLATION
1. Slide seat belt through the B-pillar trim.
2. Place B-pillar trim in position on vehicle.
3. Engage clips attaching lower trim to B-pillar.
4. Install access door above seat belt slot on B-pillar trim.
5. Install bolt attaching seat belt to floor below B-pillar.
6. Install upper B-pillar trim.
7. Install seat belt height adjuster knob.
8. Refit weatherstrip.
B-Pillar Upper Trim
B-PILLAR UPPER TRIM
REMOVAL
1. Disengage shoulder belt turning loop cover.
2. Remove adjuster knob.
3. Remove bolt attaching turning loop to shoulder belt height adjuster.
4. Remove turning loop from adjuster.
Fig. 4
5. Disengage clips attaching upper trim to B-pillar (Fig. 4).
6. Remove B-pillar trim from vehicle.
INSTALLATION
1. Place B-pillar trim in position on vehicle.
2. Engage clips attaching upper trim to B-pillar.
3. Place shoulder belt turning loop in position on adjuster.
4. Install adjuster knob.
5. Install bolt attaching turning loop to shoulder belt height adjuster.
6. Install shoulder belt turning loop cover.
7. Refit weatherstrip.
Quarter Panel Trim
UPPER QUARTER TRIM
REMOVAL