300M V6-3.5L VIN G (2000)
All involved vehicle owners known to DaimlerChrysler are being notified of the service requirement in phases by first class mail. They are requested to
schedule appointments for this service with their dealers. A copy of the owner letter is included. Owner notification will be phased over several weeks as
parts become available
>
Phase 1 includes all manual seat equipped vehicles, mid-2000 through 2002 model year vehicles equipped with a power driver's seat and early-1998
model year vehicles equipped with a power driver's seat.
>
Phase 2 includes all 1998 through mid-2000 model year vehicles equipped with a power memory driver's seat.
>
Phase 3 includes late-1998 through mid-2000 model year vehicles equipped with a power driver's seat.
Enclosed with each owner letter is an Owner Notification Form. The involved vehicle and recall are identified on the form for owner or dealer reference
as needed.
Dealers are encouraged to consider alternative scheduling and servicing approaches for this recall. This repair does not require hoists or other full service
facility special equipment and is a DaimlerChrysler Mobile Service approved repair.
Additional Information
If you have any questions or need assistance in completing this action, please contact your Service and Parts District Manager.
Customer Services Field Operations
DaimlerChrysler Corporation
Service Procedure
A.
Service Procedure for All Vehicles Equipped With MANUAL
Seat Adjusters and 2000-2002 Model Year Vehicles Built AFTER
January 1, 2000 (MDH 0101XX) Equipped With POWER Seat
Adjusters.
1.
Move the driver's seat to the rearward-most position and raise the seat to its highest position (power seat only).
2.
Adjust the seat back to the full forward position.
3.
Remove the two side screws (power only) and the rear screw (all) from the seat side shield and then rotate the shield away from the rear of
the seat (Figure 1).
