chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

ABOUT US
Crankshaft Position Sensor <--> [Crankshaft Position Sensor] > < Engine Coolant Temperature (ECT) Sensor <--> [Coolant Temperature Sensor/Switch (For Computer)]|Specifications|Page 693

300M V6-3.5L VIN G (2000)

Page 1
background image

Engine Coolant Temperature (ECT) Sensor: Service and Repair

Engine Coolant Temperature Sensor

The engine coolant temperature sensor is located next to the thermostat housing.

REMOVAL

1. Remove the negative battery cable.
2. With the engine cold, disconnect coolant sensor electrical connector.
3. Remove sensor.

INSTALLATION

1. Install engine coolant temperature sensor. Tighten sensor to 28 Nm (20 ft. lbs.) torque.
2. Attach electrical connector to sensor.
3. Install the negative battery cable.

Crankshaft Position Sensor <--> [Crankshaft Position Sensor] > < Engine Coolant Temperature (ECT) Sensor <--> [Coolant Temperature Sensor/Switch (For Computer)]|Specifications|Page 693