300M V6-3.5L VIN G (2000)
1. Install bushings onto stabilizer bar with slits facing forward and flat side facing downward. The stabilizer bar to cradle assembly bushings must be
positioned on the stabilizer bar so the slit in the bushing is positioned toward front of vehicle.
2. Install the isolator bushing retainers back onto the stabilizer bar isolator bushings.
CAUTION: When stabilizer bar is installed, position stabilizer bar, so lower part of stabilizer bar is centered in the middle of the cradle assembly.
Failure to do this may cause stabilizer bar to come in contact with other suspension components.
3. Align the stabilizer bar bushing retainers with the mounting holes in the cradle assembly.
4. Install and torque the 4 stabilizer bar bushing retainer to cradle assembly attaching bolts (2 each retainer) to 61 Nm (45 ft. lbs.).
5. Lower vehicle to the ground.
