300M Special V6-3.5L VIN G (2002)
9. Install front brake caliper on steering knuckle. Install the caliper to steering knuckle attaching bolts and tighten them to a torque of 22 Nm (192
inch lbs.).
10. Apply the brakes, then tighten the axle retaining nut to a torque of 142 Nm (105 ft. lbs.).
11. Install wheel and tire assembly on vehicle. Tighten the wheel mounting stud nuts in proper sequence until all nuts are torqued to half specification.
Then repeat the tightening sequence to the full specified torque of 135 Nm (100 ft. lbs.).
12. Lower vehicle to the ground.