Aspen 2WD V8-4.7L (2007)
Brake Pad: Service and Repair
Installation
INSTALLATION
1. Bottom pistons in caliper bore with C-clamp. Place an old brake shoe between a C-clamp and caliper piston.
2. Clean caliper mounting adapter and anti-rattle springs.
3. Lubricate anti-rattle springs with Mopar brake grease.
NOTE: Anti-rattle springs are not interchangeable.
4. Install the bottom anti-rattle springs.
5. Install the top anti-rattle springs.
6. Install inboard brake shoe in adapter.