Aspen 2WD V8-4.7L (2007)
2. Install support plate (1) on axle flange. Tighten attaching bolts (2) to 64 Nm (47 ft. lbs.).
3. Install parking brake cable (2) in the brake lever (1).
4. Install the park brake shoes (1).
5. Install axle shaft (1).
2. Install support plate (1) on axle flange. Tighten attaching bolts (2) to 64 Nm (47 ft. lbs.).
3. Install parking brake cable (2) in the brake lever (1).
4. Install the park brake shoes (1).
5. Install axle shaft (1).