Aspen 2WD V8-4.7L (2007)
1. Position the rear HVAC housing (2) into the vehicle.
2. Install the three bolts (1) that secure the rear HVAC housing to the rear interior quarter panel (3). Tighten the bolts to 3 Nm (26 in. lbs.).
3. Connect the body wire harness connector (2) to the rear HVAC wire harness connector (3).
4. Install the rear distribution ducts to the rear HVAC housing (1).
5. Install the right rear quarter panel trim.
6. Raise and support the vehicle.
7. Connect the rear heater hoses (5) to the rear heater core tubes that extend through the rear floor panel (4) behind the right rear wheel housing.