Aspen 2WD V8-4.7L (2007)
9. Carefully remove the foam seal (1) from the rear heater core and evaporator extension line flange (3). If the seal is deformed or damaged, it must
be replaced.
10. Remove the screws (2) that secure the two halves of the rear heater core and evaporator extension line flange together.
11. Remove the outer half of the rear heater core and evaporator extension line flange.
12. Disconnect the condensate drain tube (1) from the rear HVAC housing (2).
13. Remove the screw (3) that secures the rear heater core tube retaining bracket (4) to the rear HVAC housing.
14. Remove the rear heater core tube retaining bracket.
15. Carefully pull the rear heater core (5) out of the side of the rear HVAC housing.
16. Remove the two screws (6) that secure the rear extension line flange bracket (7) to the bottom of the rear HVAC housing.
