Aspen 2WD V8-4.7L (2007)
3. Remove the screw (2) that secures the second row center seat belt lower anchor (1) to the hinge bracket (3) and remove the anchor.
4. Remove the two screws (3) that secure the belt web guide bezel (2) to the top of the center seat back panel and remove the bezel from the seat
back and the belt.
5. Remove the trim cover (1) from the center seat back.
6. Remove the three screws (3) that secure the retractor (2) to the seat back frame (1).
7. Lift the retractor upward far enough to disengage the two tabs (4) on the retractor bracket from the keyed slots in the seat back frame.
8. Remove the second row seat belt and retractor from between the seat back foam and frame as a unit.
