Aspen 2WD V8-4.7L (2007)
Lateral Stabilizer Rod: Service and Repair
Bell Crank
Removal
REMOVAL
1. Raise and support the vehicle.
2. Remove the watts link nuts (3) at the bell crank (5).
3. Remove both watts links (1) from the bell crank (5).
4. Remove the bell crank bolt (4) from the differential cover and remove the bell crank (5).
Installation
INSTALLATION
1. Install the bell crank (5) and bolt (4) to the differential cover and tighten 251 Nm (185 ft.lbs).
2. Install the watts links (1) and nuts (3) to the bell crank (5) and tighten 108 Nm (80 ft.lbs).
3. Lower the vehicle.