Aspen 2WD V8-4.7L (2007)
Stabilizer Link: Service and Repair
Front
Removal
REMOVAL
1. Raise and support the vehicle.
2. Remove the lower nut (9).
3. Remove the upper nut, retainers and grommets from the stabilizer bar.
4. Remove the stabilizer link (7) from the vehicle.
Installation
INSTALLATION
1. Install the stabilizer link (7) to the vehicle.
2. Install the retainers, grommets and upper nut to the stabilizer bar (6) and Tighten to 54 Nm (40 ft. lbs.).
3. Install the lower nut and Tighten to 169 Nm (125 ft. lbs.).
4. Remove the support and lower the vehicle.