Aspen 2WD V8-4.7L Flex Fuel (2009)
Power Seat Switch: Testing and Inspection
POWER SEAT SWITCH
DRIVER SEAT WITHOUT MEMORY
1. Disconnect and isolate the negative battery cable.
2. Remove the power seat switch from the power seat. See: Service and Repair/Power Seat Switch - Removal.
3. Use an ohmmeter to test the continuity of the power seat switch. Refer to DRIVER SEAT SWITCH WITHOUT MEMORY TEST table. If not
OK, replace the inoperative power seat switch. If switch test OK, See: Seats/Testing and Inspection/Component Tests and General Diagnostics.
PASSENGER SEAT
1. Disconnect and isolate the negative battery cable.
2. Remove the power seat switch from the power seat. See: Service and Repair/Power Seat Switch - Removal.
3. Use an ohmmeter to test the continuity of the power seat switch. Refer to PASSENGER SEAT SWITCH TEST table. If not OK, replace the
inoperative power seat switch. If switch test OK, See: Seats/Testing and Inspection/Component Tests and General Diagnostics.