Aspen 2WD V8-4.7L Flex Fuel (2009)
Parking Brake Cable: Service and Repair
Installation
Front Cable
FRONT PARKING BRAKE CABLE
1. From inside the vehicle, insert the cable end fitting (2) into the hole in the pedal assembly (1).
2. Seat the cable retainer in the pedal assembly (1).
3. Engage the cable ball end in clevis on the pedal assembly.
4. Route the cable (2) through the floorpan and install the body grommet (1).
5. Place the carpet down and install the left cowl trim and sill plate.