Aspen 2WD V8-4.7L Flex Fuel (2009)
3. Apply primer (1) around the perimeter of the glass to a width of 15 mm (0.5 in.) (3).
NOTE: Make sure the primer does not touch the locating pins and tabs (2, 4).
4. Allow primer to air dry for at least 10 minutes.
5. Using a flash light, verify that glass primer is without damage.
Quarter Glass Opening Preparation
NOTE: Windshield opening shown, quarter glass opening similar.
1. Clean and vacuum quarter glass opening.
2. Level old bead of quarter glass opening adhesive (1) to a thickness of approximately 1 mm (0.04 in.) and remove loose adhesive.