Aspen 2WD V8-5.7L Hybrid (2009)
3. Position the transmission range sensor (2) into place in the transmission case.
4. Install the mainshaft (3) into the transmission case.
5. Install the transmission range sensor mounting bolt. Tighten the bolt to 8 Nm (71
NOTE: Before install the TEHCM / valve body assembly to the transmission case, be certain the existing gasket is in place.
6. Install the valve body. See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Valve Body/Service and Repair/Removal and
Replacement/Valve Body - Installation.
