Aspen 4WD V8-5.7L Hybrid (2009)
Trunk / Liftgate Handle: Service and Repair
Exterior Handle - Removal
REMOVAL
1. Remove the trim panels. See: Trunk / Liftgate Interior Trim Panel/Service and Repair/Liftgate Trim Panel - Removal
2. Disconnect the latch actuator rod (2).
3. Remove the screws (3) and from the inside of the liftgate, squeeze the arrowheads of the four clips 2 and 4 to push them through the sheetmetal,
then remove the handle (5).
4. Remove the lamp by turning the lamp socket a half-turn and removing it from the handle (5).
