Aspen 4WD V8-5.7L Hybrid (2009)
Body / Frame Mount Bushing: Service and Repair
Body Isolator - Removal
REMOVAL
1. Remove all cab to frame mounting bolts (3) and rebound cushions (2).
2. Remove the front end sheet metal mounting bolt (2).
3. Using a floor jack and block of wood under the cab sill, lift the body to gain access to the isolators.
4. Remove the cab isolators (1) and the front end sheet metal mounting isolator (3).
5. Install new isolators and repeat Steps 1 through 4, for the opposite side.
