Aspen 4WD V8-5.7L Hybrid (2009)
Trim Panel: Service and Repair
Pillar Trim
A-Pillar Trim Panel-Removal
REMOVAL
1. Using a small flat bladed tool or equivalent open the trim plugs (2) in the A-pillar grab handle and remove the bolts (3).
2. Remove the A-pillar trim panel (1).
A-Pillar Trim Panel-Installation
INSTALLATION
1. Position the A-pillar trim (1) into place and seat the retaining clips fully.
2. Install the bolts and tighten to 6 Nm (55 in. lbs.).
B-Pillar Trim Panel-Installation
INSTALLATION
