Aspen 4WD V8-5.7L Hybrid (2009)
7. Install outboard brake shoe in adapter.
8. Tilt the top of the caliper over rotor and under adapter. Then push the bottom of the caliper down onto the adapter.
9. Install caliper, See: Brake Caliper/Service and Repair/Removal and Replacement/Disc Brake Caliper - Installation.
10. Install wheel and tire assemblies and lower vehicle, See: Maintenance/Wheels and Tires/Service and Repair/Removal and Replacement.
11. If equipped with a 5.7L HEV, disconnect the 12 volt battery system ground isolation connector (1).
12. Apply brakes several times to seat caliper pistons and brake shoes and obtain firm pedal.
13. Top off master cylinder fluid level.
