Aspen 4WD V8-5.7L Hybrid (2009)
13. Before installing the ignition coils, apply dielectric grease to the inside of the spark plug boots.
14. Install the ignition coil (2) on the plugs and tighten the fasteners (3) to 7 Nm (62 in. lbs).
15. Connect the ignition coil electrical connectors (1).
16. If removed, Install the Traction Power Inverter Module (TPIM) (1) See: Hybrid Drive Systems/Power Control System/Voltage Inverter/Service
and Repair/Traction Power Inverter Module - Installation