Aspen 4WD V8-5.7L Hybrid (2009)
4. Install the two bolts (1) securing the differential housing (3) to the left engine mount hand tight.
5. Tighten all axle bolts to 95 Nm (70 ft. lbs.).
6. Install the engine oil filter.
7. Install the skid plate, if equipped.
8. Install the support crossmember (2) and securely tighten bolts (1).
9. Lower the vehicle.
10. Lower the engine using engine support fixture 8534B (1) until the left and right engine mounts align with the engine bracket through holes.
