Aspen 4WD V8-5.7L Hybrid (2009)
1. Follow all steps for 4X2 removal.
2. Unbolt and lower the steering rack, without disconnecting the lines.
NOTE: The front axle must be lowered to remove the oil pan on 4X4 vehicles.
3. Remove the front driveshaft at the axle. Mark for reassembly.
4. Support the front axle.
5. Remove the right and left axle to mount, bolts.
6. Lower axle.
7. Remove the oil pan mounting bolts and oil pan.
8. Unbolt oil pump pickup tube and remove tube.
NOTE: When the oil pan is removed, a new integral windage tray and gasket assembly must be installed. The old gasket cannot be reused.
9. Discard the integral windage tray and gasket and replace.
