Aspen 4WD V8-5.7L Hybrid (2009)
Solar Sensor: Service and Repair
Infrared Temperature Sensor - Installation
INSTALLATION
NOTE: Typical overhead console shown. Infrared sensor location may vary.
1. Position the infrared sensor (1) onto the overhead console (2).
2. Install the screw (3) that secures the infrared sensor to the overhead console. Tighten the screw to 2 Nm (17 in. lbs).
3. Install the overhead console See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Overhead Console - Installation.
4. Reconnect the negative battery cable.
