Aspen 4WD V8-5.7L Hybrid (2009)
4. Connect the current sensor (3) See: Battery Current Sensor/Service and Repair/High Voltage Current Sensor - Installation.
5. Connect the thermistor harness (1) to the Battery Pack Control Module (BPCM) (2).
6. Install the high voltage battery cover See: Battery System, Hybrid Drive/Hybrid Battery Cover/Service and Repair/High Voltage Battery Cover -
Installation.
7. Perform the High Voltage Power Up procedure . See: Battery System, Hybrid Drive/Service and Repair/Battery System - High Voltage Power Up