Aspen 4WD V8-5.7L Hybrid (2009)
Variable Valve Timing Actuator: Service and Repair
Variable Valve Timing Assembly - Installation
INSTALLATION
1. Align the slot (2) in the phaser (1) with the dowel on the camshaft.
CAUTION: Never attempt to disassemble the camshaft phaser, severe engine damage could result.
2. Position the phaser (2) in place and install phaser retaining bolt (1) and tighten to 122 Nm (90 ft. lbs.).
3. Install the timing chain and sprockets See: Engine, Cooling and Exhaust/Engine/Timing Components/Timing Chain/Service and Repair/Timing
Chain & Sprockets - Installation
