Aspen 4WD V8-5.7L Hybrid (2009)
8. Connect the fuel tank isolation valve quick-connect fitting (3) at the EVAP canister.
9. Connect the electrical connector (2) at the ESIM switch.
10. Connect the rubber hose (1) at the ESIM switch.
11. Lower the vehicle.
12. Install the fuel fill cap.
13. Connect the fuel line quick connect fitting to the fuel rail (1).
14. Perform the HEV high voltage power up procedure See: Hybrid Drive Systems/Battery System, Hybrid Drive/Service and Repair/Battery System
- High Voltage Power Up
15. Start the engine and check for leaks.
