Aspen 4WD V8-5.7L Hybrid (2009)
![background image](/chrysler/aspen_4wd/v8-5.7l_hybrid/Page-704001.png)
Tire Pressure Sensor: Service Precautions
CAUTION
CAUTION: The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures have been established for the tire size
equipped on your vehicle. Undesirable system operation or sensor damage may result when using replacement equipment that is
not of the same size, type, and/or style. After-market wheels can cause sensor damage. Do not use aftermarket tire sealants or
balance beads if your vehicle is equipped with a TPMS, as damage to the sensors may result.
NOTE: After inspecting or adjusting the tire pressure always reinstall the valve stem cap. This will prevent moisture and dirt from entering
the valve stem, which could damage the Tire Pressure Monitoring Sensor.
CAUTION: Tire pressure sensor valve stem caps and cores are specially designed for the sensors. Due to risk of corrosion, do not use a
standard valve stem cap or core in a tire pressure sensor in place of the original equipment style sensor cap and core.
CAUTION: After inspecting or adjusting the tire pressure always reinstall the valve stem cap. This will prevent moisture and dirt from
entering the valve stem, which could damage the Tire Pressure Monitoring Sensor.
CAUTION: Any time a sensor is to be reinstalled in a wheel, a new seal, cap and valve core must be installed on the stem to ensure air tight
sealing.
NOTE: TPM thresholds have been established for the original tire size equipped on the vehicle. Use original size tires only to maintain system
accuracy.