Aspen 4WD V8-5.7L Hybrid (2009)
Power Distribution Module: Service and Repair
Integrated Power Module (IPM) - Removal
REMOVAL
1. Disconnect the negative and positive battery cables.
2. Unsnap cover and remove the B+ terminal nut from the integrated power module (IPM). Remove the B+ cable.
3. Remove the IPM from the retaining bracket (1).
4. Disconnect the connectors from the (IPM).
5. Remove the Front Control Module (FCM) (2) retaining screws.
6. Disconnect the front control module by pulling it straight off the integrated power module.
