Aspen 4WD V8-5.7L Hybrid (2009)
Lateral Stabilizer Rod: Service and Repair
Rear Suspension Watts Link - Removal
Bell Crank
REMOVAL
1. Raise and support the vehicle.
2. Remove the watts link nuts (3) at the bell crank (5).
3. Remove both watts links (1) from the bell crank (5).
4. Remove the bell crank bolt (4) from the differential cover and remove the bell crank (5).
Watts Link
REMOVAL
1. Raise and support the vehicle.
2. Remove the upper nut (2) and bolt (2) to the watts link at the frame.
3. Remove the lower nut (3) to the watts link at the bell crank (5) and remove the watts link.