Aspen 4WD V8-5.7L Hybrid (2009)
Seals and Gaskets: Service and Repair
Front Output Shaft Seal - Installation
INSTALLATION
NOTE: Lubricate all seals with MOPAR(R) ATF+4 prior to installation.
1. Install the new front output shaft seal (1) into position in the transfer case bore (2).
2. Install the new front output shaft seal with Installer 10117 (1).
3. Install the new front output shaft seal slinger (1) into position on the output shaft (2).
4. Install the front output shaft seal slinger with Installer 10117.