Aspen 4WD V8-5.7L Hybrid (2009)
Wiper Arm: Service and Repair
Wiper Arm - Removal
Front
FRONT
1. Lift the front wiper arm to its over-center position to hold the wiper blade off of the glass and relieve the spring tension on the wiper arm to wiper
pivot shaft connection.
2. Remove the nut or nuts (2) that secure the front wiper arm (1) or links to the pivot shaft or shafts (3 and 4).
3. If necessary, use a suitable battery terminal puller (3) to disengage the front wiper arm (1) or links from the pivot shaft (2) or shafts.
4. Remove the wiper arm pivot end or links from the pivot shaft or shafts.
Rear
REAR