Cirrus L4-2.4L VIN X (1998)
Torquing Chassis Brake Tube Nuts
10. Using a crow foot tighten all of the brake tube nuts to a torque of 17 Nm (146 inch lbs.).
HCU Heat Shield
11. Install the HCU heat shield on the HCU mounting bracket. Install and securely tighten the attaching bolt.
12. Install exhaust system in vehicle using the reverse steps of its removal.
Right Side Splash Shield
13. Install right side engine compartment splash shield back on the vehicle.
14. Lower vehicle.
15. Remove brake pedal holding tool.
