Cirrus L4-2.4L VIN X (1998)
Intake Manifold: Service and Repair
FUEL SYSTEM PRESSURE RELEASE PROCEDURE
WARNING: Release fuel system pressure before servicing system components. Service vehicles in well ventilated areas and avoid ignition
sources. Never smoke while servicing the vehicle.
REMOVAL
1. Perform fuel system pressure release procedure before attempting any repairs.
Auxiliary Jumper Terminal
2. Disconnect negative cable from auxiliary jumper terminal.
3. Remove Air Inlet Resonator.
4. Disconnect the fuel supply line quick connect at the fuel rail assembly.
WARNING: Wrap shop towels around hose to catch any gasoline spillage.
5. Remove fuel rail assembly attaching screws and remove fuel rail assembly from engine. Cover injector holes with a suitable covering.
CAUTION: Do not set fuel injectors on their tips, damage may occur to the injectors
6. Remove accelerator, kickdown and speed control cables from throttle lever and bracket.
Idle Air Control (IAC) Motor, Throttle Position Sensor (TPS) Wiring Connectors, And Vacuum Hose Connection
7. Disconnect idle air control (IAC) motor and throttle position sensor (TPS) wiring connectors.
