Cirrus L4-2.4L VIN X (1998)
2. Install the cooler lines in the routing clip on the left frame rail.
3. Install the power steering fluid return hose coming from the engine on the power steering cooler line. Install the hose clamp on the power steering
fluid hose. Be sure hose clamp is installed on hose past the upset bead on the power steering cooler line.
Torquing Power Steering Fluid Hose Tube Nuts
4. Install the power steering fluid return hose on the steering gear. Then using a crow foot and torque wrench tighten the tube nut to a torque of 31
Nm (275 inch lbs.).
5. Install the-clip holding the 2 power steering fluid cooler lines together.
6. Install the front suspension crossmember.
7. Install the left front wheel/tire.
8. Install the bracket attaching the power steering cooler lines to the left frame rail. Install bracket attaching bolt and tighten to a torque of 7 Nm (60
inch lbs.).
Hose Clamps At Power Steering Fluid Cooler
