Cirrus L4-2.4L VIN X (1998)
Electronic Brake Control Module: Service and Repair
REMOVE
NOTE: To replace the Controller Antilock Brakes (CAB) on this vehicle, the Integrated Control Unit (ICU) and CAB need to be removed from the
vehicle as a unit. The CAB can then be separated from the Hydraulic Control Unit (HCU). Do not attempt to replace the CAB with the ICU mounted
in the vehicle.
1. Remove the ICU from the vehicle.
Pump Motor To CAB Wiring Harness
2. Unplug the pump motor wiring harness from the CAB.
CAB Attaching Bolts
3. Remove the 4 bolts attaching the CAB to the HCU.