Cirrus L4-2.4L VIN X (1998)
2. Mount Puller, Special Tool C-4333 or C-4068, or equivalents on power steering pump pulley. Mount power steering pump and puller in a vise to
keep shaft of power steering pump from turning when removing pulley.
3. Remove the drive pulley from the shaft of the power steering pump.
4. Replace power steering pump pulley if bent, cracked, or loose.
INSTALL
1. Mount power steering pump in a vise using the power steering pump mounting bracket.
2. Place power steering pump pulley squarely on end of power steering pump shaft.