Cirrus L4-2.4L VIN X (1998)
Suspension Strut / Shock Absorber: Service and Repair
Shock Absorber Replacement
Front
WARNING: Do not remove shock rod nut while shock assembly is installed in vehicle, or before shock assembly spring is compressed.
REMOVE
1. Loosen wheel nuts.
2. Raise vehicle on jack stands or centered on a frame contact type hoist.
3. Remove wheel and tire assembly from location on front of vehicle requiring strut removal.
4. If both shock absorbers are removed, mark the shock absorbers right and left according to which side of the vehicle they were removed from.
Fig. 6
5. Remove the wheel speed sensor cable routing bracket from the steering knuckle.
Fig. 7
