chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Radio Operation|Page 8840 > < Diagram Information and Instructions|Page 8837
Page 1
background image

Radio/Stereo: Description and Operation
Radio Operation

There are two audio systems offered on this vehicle. The base system uses four speakers and a standard antenna. The optional system has six speakers,
power amplifier, and a power antenna.

Both systems are powered by a 10 amp fuse located in cavity 14 of the junction block on circuit X12. This fuse is ROT when the ignition switch is in the
ACCESSORY or RUN position.

The A31 circuit, which receives it's power from the ignition switch, on circuit A1, is protected by a 20 amp fuse located in cavity 8 of the Power
Distribution Center (PDC).

Both the standard and optional radios use an external case ground. This case ground attaches to the rear of the radio and the instrument panel.

Radio Operation|Page 8840 > < Diagram Information and Instructions|Page 8837