chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Door Latch/Striker - Rattle|Page 9153 > < Door Latch/Striker - Rattle|Page 9151
Page 4
background image

REPAIR PROCEDURE:

This bulletin involves replacing bent rear door latch linkage.

1.

Remove the door trim panel on affected door.

2.

Replace bent latch linkage.

3.

Install door trim panel as far rearward as possible, being careful not to bend latch link.

POLICY: Reimbursable within the provisions of the warranty.

TIME ALLOWANCE:
Labor Operation No: 23-41-18-90

Loosen Door Panel, Push

0.1 Hrs.

Rearward And Check
Latch Operation

FAILURE CODE: XX - Service Adjustment

23-41-18-91

Latch Linkage Replace, Left Door

0.3 Hrs.

23-41-18-92

Latch Linkage Replace, Right Door

0.3 Hrs.

FAILURE CODE: 06 - Bent

Technical Service Bulletin # 238294

Date: 941104

Door Latch/Striker - Rattle

NO: 23-82-94

GROUP: Body

DATE: Nov. 11, 1994

SUBJECT:
Door Latch/Striker Rattle

MODELS:

1995 (JA) Cirrus/Stratus

SYMPTOM/CONDITION:

Rattle (chuckle) from the door latch/striker area as vehicle encounters uneven road surfaces. May affect one or more of the doors.

REPAIR PROCEDURE:

This bulletin involves adjusting door striker(s) to eliminate rattles.

Door Latch/Striker - Rattle|Page 9153 > < Door Latch/Striker - Rattle|Page 9151