chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Child Protection Lock - Will Not Engage|Page 9172 > < Child Protection Lock - Will Not Engage|Page 9170
Page 2
background image

REPAIR PROCEDURE:

This bulletin involves replacing bent rear door latch linkage.

1.

Remove the door trim panel on affected door.

2.

Replace bent latch linkage.

3.

Install door trim panel as far rearward as possible, being careful not to bend latch link.

POLICY: Reimbursable within the provisions of the warranty.

TIME ALLOWANCE:
Labor Operation No: 23-41-18-90

Loosen Door Panel, Push

0.1 Hrs.

Rearward And Check
Latch Operation

FAILURE CODE: XX - Service Adjustment

23-41-18-91

Latch Linkage Replace, Left Door

0.3 Hrs.

23-41-18-92

Latch Linkage Replace, Right Door

0.3 Hrs.

FAILURE CODE: 06 - Bent

Technical Service Bulletin # 234295

Date: 950721

Child Protection Lock - Will Not Engage

NO: 23-42-95

GROUP: Body

DATE: Jul. 21, 1995

SUBJECT:
Child Protection
Lock Engagement

MODELS:
1995 (JA) Cirrus/Stratus

SYMPTOM/CONDITION:

Child protection lock control will not move to the "engage" position.

DIAGNOSIS:

Loosen two rear door trim panel attaching screws (one in the arm rest pull cup and one behind the door latch handle). Push door trim panel rearward and

Child Protection Lock - Will Not Engage|Page 9172 > < Child Protection Lock - Will Not Engage|Page 9170