Cirrus V6-2.5L VIN H (1995)
Headliner: Service and Repair
REMOVAL
CAUTION: It is not possible to remove the rear locating clip attached to the headlining just forward of the rear window without damaging the
headlining substrate or locating clip. Verify availability of replacement headlining prior to beginning procedure.
1. Remove sun visors.
2. Remove sun visor supports.
3. Remove assist handles.
4. Remove coat hooks.
5. Pull dome lamp straight down to disengage retaining clips.
6. Disengage wire connector from dome lamp.
7. Pull map lamp, if so equipped, straight down to disengage retaining clips.
8. Disengage wire connector from map lamp, if so equipped.
9. Pull sunroof switch, if so equipped, straight down to disengage switch from retainer.
10. Disengage wire connector from sunroof switch, if so equipped.
11. Remove left A-pillar trim panel.
12. Disengage push-in fasteners holding headliner wiring harness to A-pillar and instrument panel brackets.
Headlining Wiring
13. Disengage headliner wire connector from fuse panel.
14. Disengage upper fasteners on right A-pillar trim panel and allow trim panel to lay toward center of vehicle.
15. Remove upper B-pillar trim panels.
16. Remove upper quarter trim panels as necessary to clear headlining removal path.
17. Recline passenger side front seat.
18. On sun roof equipped vehicles, disengage hook and loop fasteners holding headlining to sunroof module.