Cirrus V6-2.5L VIN H (1995)
Crankshaft: Description and Operation
CONSTRUCTION
The crankshaft is made of nodular cast iron and has six individual throws with five counter weights, it is supported by four main bearings with
number three being the thrust bearing.
VIBRATION CONTROL
The six separate connecting rod throws pins reduce torque fluctuations while a dynamic damper is used to control torsional vibration of the
crankshaft.
SEAL LOCATIONS
Rubber lipped seals are used at front and rear. The front seal is retained in the oil pump case and the rear is retained in a die cast aluminum
block-mounted housing.