Cirrus V6-2.5L VIN H (1995)
Piston: Service and Repair
Removal and Installation
REMOVAL
1. Identify pistons with matching cylinder. The pistons are not interchangeable from bank to bank. Pistons with the letter R and arrow toward the
front of engine are to be installed in cylinders 1-3-5. Pistons with the letter L and arrow toward the front of engine are to be installed in cylinders
2-4-6.
2. Mark connecting rod and cap with cylinder number.
3. Remove piston rings.
INSTALLATION
1. Before installing pistons and connecting rod assemblies into the bore, be sure that compression ring gaps are staggered so that neither is in line
with oil ring rail gap.