Cirrus V6-2.5L VIN H (1995)
Rocker Arm Assembly: Service and Repair
Rocker Arm Replacement
REMOVAL
1. Remove cylinder head cover.
2. Identify the rocker arm shaft assemblies before removal.
3. Install auto lash adjuster retainers, Special Tool MD-998443, or equivalent onto rocker arms. These retainers hold the lash adjusters into position
when the rocker arms are serviced.
4. Loosen the attaching fasteners. Remove rocker arm shaft assemblies from cylinder head.
5. Mark rocker arm/hydraulic lash adjuster assemblies for reassembly in their original position. Remove rocker arm/hydraulic lash adjuster assembly.
Lash adjusters are serviced as an assembly with the rocker arm.
NOTE: The automatic lash adjusters are precision units installed in machined openings in the valve actuating ends of the rocker arms. Do not
disassemble the auto lash aid.
INSTALLATION