Cirrus V6-2.5L VIN H (1995)
1. Install rocker arm and shafts with the FLAT on the shafts facing the timing belt side of the right cylinder head. For the left cylinder head, install
rocker arm and shafts with the FLAT on the shafts facing the transmission side of the engine. Install the retainers and spring clips in their original
positions on the exhaust and intake shafts.
2. Tighten bolts to 31 Nm (276 in. lbs.) in sequence shown.
3. Remove auto lash adjuster retainers Special Tool MD-998443, or equivalent from rocker arms.